Top 10 ???? 20Pcs 4.7mm-12v Car White Mini Bulbs Lamps Indicator Cluster Speedometer Backlight Lighting ✔️

8 reviews for Top 10 ???? 20Pcs 4.7mm-12v Car White Mini Bulbs Lamps Indicator Cluster Speedometer Backlight Lighting ✔️

1. 

   Rated 4 out of 5

   James – November 14, 2018

   If you are the person who is unsure of what you want to do with your cluster I hope this helps. When you turn your high beams on and the little blue light comes on the cluster and you find that it bothers you because it’s too bright then you may not want to go with an led conversion. I am speaking for the range of vehicles who have a similar cluster to a 04 Suburban. Yes they dim, but not much. I installed only 2 LEDs for my conversion just to see if I would like them. It looks nice and clean but I like my dash lights dim at night but not off. With the LEDs on the lowest dimmable setting they are still too bright for me. Plus all the other billion incandescent bulbs in the vehicle like window switches radio dials are too dim to see now. Now a full conversion of your whole vehicle might just look alright! Just these 2 led bulbs create a glare on the windows and I just don’t like that I can’t dim them much more. These LEDs do as they are advertised and I cannot complain one bit about their performance. They look awesome for sure and very clean. Everyone I have shown love the look but yet they aren’t the ones looking through the sun to see oncoming traffic lol. They just don’t work for me. I have dreamed of doing this and now that I’ve tried it I’m going to just stick with incandescent 🙁 Give it a try if you must and you know everyone has their own opinions 🙂 In the photo I do not have the plastic covering over the gauges so that is why there is a large semicircle which emits a lot of the light.

2. 

   Rated 4 out of 5

   Frank M. – October 14, 2021

   I have a 2004 Mercury Grand Marquis. I sized these for my AC controller (EATC). I was able to get them to fit. You can use this with anything 12V if you can solder. They turned out awesome. I agree with some of the reviews. The manufacturer should use plated through holes for soldering the pins on the board and not solder mounts but I’m sure it saves them money by not having plated through holes. However try to get a tiny circuit board cut for this price with those specs. Anyhow. They bright LEDs really brought the look of the controller to a modern look by making the light up lettering crisp. Where the old incandescent made the letters look dirty. It will take you some patience and some thought. What I did is not plug and play.

3. 

   Rated 4 out of 5

   WhiteFireTiger – February 24, 2022

   These are tiny (make an ibuprofen look big) but very bright and having 3 leds on the pcb they don’t hot spot as bad as single led versions I’ve tried.I used these in the hvac and headlight switch & heated seat switches on my chrysler 300 and I’m sure I’ll be finding other bulbs to replace with these too.

4. 

   Rated 5 out of 5

   vollie redd – June 17, 2022

   Needed some back-lighting for a piece of electronic gear,these were just the ticket. I liked the long leads,let’s you be real creative with your mounting options.Thanks,HillBilly

5. 

   Rated 4 out of 5

   Just Johnny – July 7, 2022

   They worked great in my instrument cluster, no resistors needed, super quick install and nice wavelength

6. 

   Rated 4 out of 5

   AB – July 30, 2022

   Easy installation and bright view on the dash

7. 

   Rated 4 out of 5

   shawn smith – August 2, 2022

   lot brighter then stock dash bulbs and will last longer

8. 

   Rated 5 out of 5

   Carlos – August 26, 2022

   I like how bright it is and it just makes the car look cleaner