- Brand: DAIERTEK
- Material: ABS, Rubber
- Item Dimensions LxWxH: 1.9 x 1.98 x 0.83 inches
- Item Weight: 28 Grams
- Quick Charge: Dual USB Rocker Switch designed with dual USB ports supporting.USB outlet: 12-24VDC input, power outlet 2.1A & 2.1A.USB socket can intelligently detect your devices and simultaneously charging 2 devices at optimal current. Charging speed are faster than conventional chargers and works for all USB-powered devices.
- LED Voltage Display: USB car charger adapter socket builts in digital LED voltage monitor, it can display accurate voltage status of your vehicle’s battery at the real-time. When the connection is successful, the light will illuminate. It’s easy to check if connection is current and can be find and be used clearly in a dark environment.
- Material: USB car charger adapter socket is made of ABS material.This material is flame retardant and environmentally friendly.Works even in high or low temperature environments.The cover is made of rubber material the voltage also can be read when the cover is engaged.
- Installation: It is easy to install: “+” is plugged into positive pole and “-” is put on negative pole. the adapter could be wired on an on/off switch, turn if off for energy-saving.Standard snao-in installation.
- Application: Application: Useful for DC 12/24V car, boat, marine, motorcycle, ATV, RV etc.This USB power outlet is suitable for charging mobile phone, GPS, digital camera, PDA, android tablets, power banks, video games controllers, sports watch and other USB accessories.



















Michael See –
I am using the volt meter for a power box (look it up on Youtube) and the square profile is easy to cut into the plastic so it snaps in. This meter gives a voltage readout and 2 USB ports (everything has USB ports) to any project. There is a rubber cover for protection from rain. For the price – this is a great addition to my power box.
i8bigfoot –
Only one of the 2 gives the accurate voltage, but it is great other then that hiccup.
Leroy Turner –
Nice product
Rufus –
Very simple to install
Scooter –
Add to a buggy upgrade
GnshpCSO –
I purchased this to use for my shuttle bus conversion build. I installed it on the main switch panel of the conversion bus, and it is performing flawlessly. Good value with this charge port.
Raul –
Good product works accurately just with slight modification worked on My 2012 camry
MICHAEL LAMBERTI –
Works well and the blue numbers match other blue switch lights.An installation tip. Be careful when cutting hole to install as it clips in up/down, not left/right like other switches of this size/type typically do. DO NOT make the hole too big in the up/down direction as it will not fully clip in/hold and will move/rattle. I had to hot glue the back to keep it from moving and rattling in a plastic dashboard for a UTV. More installer error than item’s fault.All in all a very nice addition to the UTV.