- Fit Type: Universal Fit
- Brand: Motor Trend
- Color: Gray
- Material: Faux Leather, Foam, Leather, Rubber
- Position: Front
- SOFT and LUXURIOUS – Add some style and protection to your automobile with our Motor Trend Seat Covers. We use only high-quality microfiber leather to provide cozy yet durable protection for your car upholstery. They’re not only soft to the touch, but also waterproof.
- PADDED FOR COMFORT – Unlike other seat cushions for cars, we made sure that comfort was a priority for our products. The entire seat mat is lined with a high-density foam to provide maximum comfort and relief during long trips and daily commutes.
- WON’T MOVE OR SLIDE AROUND – You won’t have to worry about fixing or reinstalling these seat cushions every time you drive your car. The backside is coated with small rubber nibs to prevent any movement when in use. Anchors attached to elastic straps also provide secure reinforcement.
- CONVENIENT FRONT POCKETS – Easily store your cellphone, wallet and more using the built-in front pocket. The stitched divider helps to keep your goods organized. Conveniently add some extra storage and protection to your car using these seat covers.
- UNIVERSAL FIT FOR MOST VEHICLES – We made sure to design our seat covers to fit in nearly any vehicle. This seat cushion measures 21” x 19. 5”. Please see the provided pictures for installation examples.









































GoldenEye –
As the saying goes, “It’s better than nothing”.One day delivery with Prime.Pros:- It’s affordable- universal fit… kinda- protects your seat or covers stuff up- fast delivery- let’s be real, they’re cheapCons:- Universal fit, that doesn’t fit right for my specific vehicle, but it can be made to fit.- the “beige” color is hideousWas it easy to install? Kinda… I got lucky. Out the box, the only easy part was sticking the plastic discs between the seat cushions and attaching the hook in front.This was listed as fitting my vehicle on Amazon. I own a 2006 Toyota Sequoia. It’s a universal fit and it wasn’t so universalThe elastic band that typically goes underneath the seat didn’t for me. The elastic band will ride up due to the bottom plastics at the base of my seat. You might not have this car specific issue like me. There is another elastic that hangs down from the center of the front pockets. That elastic has a hook at the end of it and it hooks on perfectly to the plastic underneath the front of my seat. NOW to deal with that pesky elastic band so the sides don’t ride up and so the cover lays flat. I would recommend getting some car interior s-hooks. I had some left over from another car cover. I ran the elastic through the open end of the circle and hooked it on to metal frame that attaches the chair to the floor. I did so on the left and right side of each chair. This made the seat covers lay flush on the seats. Haha… SUCCESS!Would I recommend it? If you want to protect your seats and not spend a lot, these will do. If you have a 1st gen Sequoia you can make them fit, but maybe don’t be such a cheapskate like me and go with something better… or go with the black/ grey ones. The “beige” color is like a yellow cream/ pastel color. I guess I can live with this color instead of returning them for the black ones (I’m cheap and lazy).As far as durability goes only time will tell. The seat covers seem like they’re made well and they should last a bit.I threw on some seat cushions to further protect the seat from wear and tear, but that’s for another review. I hope this review helps you in making the right choice.
Darylee C. Foertsch –
comfortable water / washable surfaceIt is not hot and sticky in the summer as I had expected. It is comfortable…and best is a great protection for the upholstery from spills etc.My only issue is that the side tore from the seat and though I repaired it twice by hand sewing, It keeps tearing.What I am going to have to do is to back it with heavy canvas and over sew the entire side seam so it is one sold piece instead of a seam on the driver’s entry side. It will still look the same from the top, but the bottom will be one piece of canvas that can’t tear so it takes the extra tension of sliding in and out.
Russ E. –
These fit my Jeep Cherokee Latitude and you can hardly tell they’re covers. They’re almost the same color as my sears. They’re water resistant. My neighbors dog was exited to see me and my wife left the passenger door open when she stepped out of the Jeep. This was on a rainy day and he jumped up in the passenger seat bringing in muddy wet dog footprints. My neighbor got upset and told me he would pay to have the seats cleaned. I lagged and removed the seat cover, took it in the house and wiped it clean with damp paper towels. He was relieved but had that been my cloth seat it would have been ruined. I LOVE THESE COVERS! Absolutely worth every penny. Actually, I’m going to upgrade to while set soon to protect my back seat as well.
Evette Taptue –
These does the job. Stays in place for the most part as long as the straps are in place. They look very expensive on the seats. Nice to have the pockets additional storage.
Stephen and Mandy Daley –
I use it in my GMC Sierra truck. Has a universal fit. Covers one of the seat belt connections, but still doable. My dog does great climbing on it with no more tears.
Virginia –
The front seat covers are easy to install. They fit well. The back bench seat cover does not have slots for seat belts. It requires removal of the back seat. The website that the instructions say to go to for videos has nothing on it. My driver’s seat was peeling and I needed the cover to keep it from getting worse. I thought the back seat would be nice to protect the seats from the mess my kids make in the car. So far, only using the front covers.
Heather –
I like the full seat covers I got for my Element two years ago but the driver’s seat is wearing through. As I shopped for new ones I came across these the I can just add to the seat and leave the backrest as it is. These are soft, cushy, love the way they feel even in the back of my legs, the storage pockets are pretty awesome, and they have a super secure fit. I had to cut a one inch slit in the seat cover that is underneath to allow for the anchors to poke through to the back but I thought I was going to have to get rid of them anyway. Now I can keep both and they look awesome. I’m pretty stoked I could get a color blue that matches my car’s interior, that’s usually difficult. GREAT value, I’m really happy with them.
Bartley –
I bought these for a 2002 Toyota Sienna. They work but are not a direct fit. They are pretty durable and do the job of protecting the foam on the original seat due to the original leather cracking.